RF750 Portable Shortwave Radio
06
5.1
5.2
5.2.1
Band switching:
In the state of power on, short press the
[BAND]
key to switch between MW / FM / SW / WB bands.
Auto/Manual Scan & Station storage
in FM, MW and SW modes:
5.3 Channel Selection
According to the operation in 5.2.1, after performing a channel
scan, you can press “ ”or “ ” button to select a previously
saved channel. The 1-7 number indicator lights up accordingly.
If more than 7 are stored, the indicator light combination is on
：
For example, Memory 8 is: Light 1 + Light 2 are on for 1 second at
the same time,
Auto scan and station storage:
In the state of power on, In
MW / FM / SW band, short press button radio “ ”
indicator light on,
press and hold button for two seconds,
“ ”indicator light flashing, means that the
full-automatic scan and storage radio station is started, and
the station will scan from the low to high, high to end
frequency. After completing a scanning circle, it will
automatically stop and play the first saved station.
5.2.2 Manual scanning:
In the radio working mode, slide the coding pulley switch on
the right side to find the active radio station with “ ”
signal indicator light on.
SW frequency range: 5.70-17.9MHz
WB frequency range: 162.400-162.550MHz
MW (Medium wave) channel capacity: 20;
FM channel capacity: 20;
Seven meter waves in short wave, and each meter wave
can store 10 (total: 110).
When listening to FM, SW and WB bands, please pull up the telescopic
antenna.
