③
Multi-function area:
VOL: Digital Voltage
RM: Rotating Speed of Motor
ODO: Odometer (total mileage)
TRIP: Single Mileage
Time: Working Time
④
Speed mark:
CUR: Current Speed
MAX: Maximum Speed
AVG: Average Speed
①
Press the “+” button to raise the speed grade & the “-” button to lower the speed grade;
②
While riding, press “ON/OFF” to switch to multi-function area to display data;
③
On still status, press and hold “-” to active 6 km/h cruise mode; on riding status, press and hold “-”
to enter real-time cruise mode (if it is currently in the cruise mode, the cruise will be released);
④
Press and hold “ON/OFF” for 3 seconds to turn the headlight on;
⑤
While the display is currently on working status, press and hold “ON/OFF” for 3 seconds will turn
the headlight on, continue to press “ON/OFF” for 3 seconds, it will turn off the display;
⑥
Press and hold “+” and ”-” to enter the parameter setting interface, the parameters that can be set
include: backlight brightness, mileage unit, voltage level, sleep time, assist gear, wheel diameter,
number of magnets, speed limit, zero start and non-zero start setting, drive mode, power-assisted
sensitivity, power-assisted start intensity, power-assisted magnetic steel plate type, controller current
limit value, ODO reset setting, etc.
In the setting interface, press “ON/OFF” to switch the menu above and press “+” or “-” to adjust the
parameters of the current menu. After the parameter is modified, it will flash. After selecting the set
value, press “ON/OFF” to save the current setting and move forward to the next menu; press and hold
“+” and ”-” to exit settings. If no actions for 10 seconds, the menu will be exited as well.
Introduction to the Use of Buttons
12
⑤
Failure mark:
From left to right: Controller Failure - Brake Lever Power Off - Handlebar Failure - Motor Failure -
Under-voltage Protection
⑥
Assist state (Mode 0-5): ; Cruise mark:
eTrail Terra E-Bike
