Note.
The system automatically defaults to the “Low Rate” mode and when the rate is too high,
an error message “OVERRATE” will be displayed. The mode should then be changed to
“High Rate”.
Attention.
The PDC cannot be switched on when the battery charger is connected. Always
disconnect the battery charger before using the system.
Important.
Throughout this manual the following words are given a specific meaning and the
reader should be aware of their significance.
Attention
; Used where there is a risk of damaging the PDC by
incorrect handling or operation error.
Note
; Used where information is provided to aid better understanding of
the PDC or its use.
4
