background image

 10 of 15 

TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v23.02 

 

 

Mounting the Solar Panel to the Pole

• 

has pre-drilled slots for two  

different orientations depending on the type of pole that is used. For mounting on a flat surface, 

 

at the desired 

position with the solar panel facing as close to south as possible at a 45° angle and secure to pole

• 

Tighten all nuts on the mounting bracket and solar panel.

 

 

Large Fixed Solar Panel Mounting Bracket Installation Instructions 
For use with 80 watt panels 

• 

Assemble the bracket by attaching the support piece to the larger 
bracket.  

• 

Use the remaining bolts and spacers to secure the solar panel to the  
bracket. Tighten all nuts on the mounting bracket and solar panel. 

• 

Attach mounting bracket with solar panel to pole. Radarsign provides 
two banding clamps that will fit 3½” - 4½” diameter poles. For larger or 
smaller poles, customer must provide clamps.  

• 

Slide bracket up the pole to desired position with the solar panel facing 
as close to south as possible at a 45° angle and secure to pole. 

• 

Tighten all nuts on mounting bracket and solar panel. 

Fl

at

 s

ide

 

Bolts for  

securing to flat 

surface 

Flat side of short bracket facing towards the pole 

Open side of short bracket facing away from the pole 

Open side 

Position so top holes are farthest from the pole 

F

lat surf

ac

e

 

Large bracket 

Содержание TC-800
















Отзывы: