Radarsign TC-400, Руководство по эксплуатации

Страница: 15 / 16

15 of 16 Radar Speed Sign Operation Manual_MN0025 v21.02
Appendix A: Relay Switch Option (cont ’ d)
Hyper - Alerts ™
Hyper - Alerts ™ can be configured to activate at
a given speed using the Alert settings in the HOME
configuration screen.
In the example shown, Beacon Mode is enabled for
Alert 2. If a car is traveling over 30 MPH, the Alert 2
settings take over and the Hyper
- Alerts ™ will activate.
Servicing the Interface Board
The only user serviceable parts on the Interface board are the output relay fuses. If a wiring short, or some
other event occurs causing the fuses to blow, replace with any standard 5 x 20 mm 240 VAC (or greater),
2A, slow
- blow fuse (Part number 5ST 2 - R or equivalent).
Fuses