Radar Systems Prism2, Руководство пользователя, Страница: 9 / 65

8
4. Select your Local Area Connection icon and click right mouse button on it. Select
the item Properties of the pop-up menu.
5. Select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button.
6. For GPRs manufactured after 2015 - click the Obtain an IP address
automatically option and continue from the point 10.
7. For GPRs manufactured before 2015 - click the Use the following IP address
option.
8. Click the IP Address box and enter 192.168.0.2 (if this address is occupied or is not
accessible, you could use any address from 192.168.0.2 to 192.168.0.254, except
occupied address 192.168.0.10.
Please, consult with your network administrator
before changing IP addresses ).
9. Click the Subnet mask box and enter 255.255.255.0 .
10. Press OK button.
11. Press Close button.
12. Close the Network and Sharing Center window
For Windows 8 / 8.1 / 10 :
1. Right-click on bottom left corner (on your Desktop ), and then press Control Panel .
2. Chose the sub item View network status and tasks , of Network and Internet item.
3. Click the link Change adapter settings in the left part of Network and Sharing
Center .
4. Select your Local Area Connection icon and click right mouse button on it. Select
the item Properties of the pop-up menu.
5. Select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button.
6. For GPRs manufactured after 2015 - click the Obtain an IP address
automatically option and continue from the point 10.
7. For GPRs manufactured before 2015 - click the Use the following IP address
option.
8. Click the IP Address box and enter 192.168.0.2 (if this address is occupied or is not
accessible, you could use any address from 192.168.0.2 to 192.168.0.254, except
occupied address 192.168.0.10.
Please, consult with your network administrator
before changing IP addresses ).
9. Click the Subnet mask box and enter 255.255.255.0 .
10. Press the OK button.
11. Click the Close button.
12. Close the Network and Sharing Center window
If for any reason you don’t like new IP address of your computer you may reset your old
IP address following procedures described above. But before you reset your old computer IP
address you have to change Control Unit IP address. As default it is 192.168.0.10. For
information about the default Control Unit IP address changing, refer to
Changing the Control
Unit IP address in Appendix A (p.55).
5.2. Configuring the computer for wireless connection with Zond-12e or
Python Georadar Control Unit
Starting from 2015 “Zond-12e Advanced” GPR (serial numbers from 0537) and
“Python-3” (with serial numbers from 0027) GPRs contain internal network router that is