4
The
Anti-Smoking Alarm
High Tech Solutions for the New Millennium
I N S T A L L A T I O N G U I D E
Anti-Tamper Screwdriver
Siting of Detectors
Lamp Test
Each of the Cig-Arrete Smoke Detectors can be fixed securely in position within its
individual base.This is achieved by means of tightening the Allen screw shown in the
diagram using the Anti tamper screwdriver (part number CSA-ATS) to turn the screw
six full turns clockwise, or until the detector is locked firmly in its base.This will prevent
any unauthorised removal of the detector, thus ensuring that it remains available to
sense an alarm condition. Do not over-tighten the screw as this may cause the detector
head to jam in its base.
When installing your Cig-Arrete Smoke Alarm, it is important that you plan the location
of each of the Cig-Arrete Smoke Detectors to optimise the performance of your
system.We suggest that for example, when installing in a toilet area, each trap is fitted
with its own detector, so that individual alarms can be identified easily.
Never install the detectors next to an atomiser type air freshener, or in location that
may be subject to wind speeds in excess of 5 metres per second. Remember that the
alarm is a highly sensitive piece of equipment, and as such performs better in a clean,
calm atmosphere at high sensitivities.You can of course reduce the sensitivity settings as
described overleaf should you find that unwanted alarms are being reported due to
excessive air movement.
In order to periodically test the lamps on the controller, press both the 'Silence' and
'Reset' buttons simultaneously, and release. All the lamps will illuminate and the buzzer
will sound to provide a visual and audible confirmation that they are within working
limits.
Any enquiries regarding the installation of the Cig-Arrete Smoke Alarm or other Radal
Manufactured in the UK by
Radal Technology Limited
104 Lydgate, Burnley
Lancashire BB10 2DU England
Tel: +44 (0)1282 835219
Fax: +44 (0) 1282 429875
Email: [email protected]
Internet: www.radaltechnology.com
