manualshive.com logo in svg

rada Pulse 120, Руководство по эксплуатации продукта, Страница: 6 / 48

Поделиться
Скачать
rada Pulse 120 Скачать руководство пользователя страница 6

6

4. Accessories
4.1 Rada Pulse Relay Box

The rada pulse relay box is designed to be connected to the auxiliary outputs of the 

rada pulse control box. it provides three switched power relays to enable the pulse 

system to be used in conjunction with equipment such as pumps, lights and fans. 

all three relay outputs are fuse protected. The rada pulse hand held programmer 

is required to enable these functions to be used.

4.2 Rada Pulse Hand Held Programmer

The rada pulse hand held programmer is required to modify the default settings 

within the rada pulse control box. The programmer has an extendable lead which 

plugs into a socket in the top of the control box.
The programmer has a two line (alpha numeric) backlit display and push buttons to 

allow the user to navigate through the menu choices and set the configuration data. 

Parameters such as activation time, delay time and post flush waiting time etc, can 

be programmed for each outlet.
The controller is multilingual and the user can select the appropriate language via 

the menu system.

4.3 Rada Disable Key switch

The rada disable Key switch is a key operated isolation switch designed to be used 

with the rada pulse control box. The unit is wired directly to the pulse control box 

and disables the system for cleaning and maintenance.

4.4 Rada Pulse Key switch

The rada pulse Key switch is a key operated isolation switch designed to be used 

with the rada pulse control box. The unit replaces a sensor for the purpose of 

manually turning on the system e.g. group showering.

4.5 Rada Mounting Plate 129

The mounting plate is intended to be used when mounting the rada pulse 129 

sensor onto difficult walls or surfaces, or where extra security screws need to be 

used (not supplied).

The mounting plate is a plated brass ring, pre-drilled, to allow secure fixing of the 

Rada Pulse 129 sensor. The plate is drilled to allow wall installation or fixing onto a 

junction box, and is supplied with 2 x m5 x 12 mm stainless steel screws, to secure the 

rada pulse 129 sensor (wall screws and junction box screws are not supplied).

Содержание Pulse 120

















































Отзывы:

Нет отзывов