rada Autotherm-3 EV, Руководство по эксплуатации продукта

Страница: 12 / 24

12
INSTALLATION
Read the section
INSTALLATION REQUIREMENTS
first.
The slide bar should be fixed to the wall to one side of the shower control, at a convenient
height for all the family. It should be positioned so that the handset discharges down
the centre line of the bath, or across the opening of a shower cubicle and should
be directed away from the shower control. For category 5 installations the security
hose retaining ring
MUST be used.
Solid, dry-lined, stud partition, shower cubicle or
laminated panel walls
1. Decide on a suitable position for the
slide bar avoiding buried cables and
pipes. Make sure that when the hose
retaining ring is placed in the lowest
position on the slide bar, there is
a minimum of 40 mm between the
handset and bath/tray spill-over level.
Security Ring
40 mm
730 mm
2. For category 5 installations, secure
the lower slide bar support a minimum
730 mm above the top of the bath
spill-over level, avoiding any buried
cables and pipes.
Make sure there
is a minimum of 40 mm between the
handset and top of the bath spill-
over level. This is to prevent back-
siphonage.
40 mm Minimum
Spill-over Level
Hose Retaining Ring