Rad2Go ZZ Cruiser, Руководство пользователя

Страница: 8 / 19

Procedure for changing rear tire of ZZ Cruiser
•
Tools Required:
- Phillips screwdriver
- 8mm wrench
- 2 x 16mm wrench
Ensure power switch is in the "off" position before beginning any work on the scooter.
Fig. 1
Step 1) Remove the 3 screws from the deck, use the Medium size Allen wrench to remove screws as shown
in Figure 1. Lift the deck.
Fig. 2
Step 2) Remove screw holding brake shield in place (see fig. 2) located next to the left side of the rear tire.
This bolt connects the brake shield to the frame.
8