RACOM RipEX 1.12.2, Руководство пользователя

Страница: 148 / 189

○ IP dst
IP destination address range in the following format: aaa.bbb.ccc.ddd/mask
○ Port src
TCP/UDP source port (range) in the following format: aaaa(-bbbb)
○ Port dst
TCP/UDP destination port (range) in the following format: aaaa(-bbbb)
○ Include reverse
Tick box.
When ticked, the frames defined by the IP src (or the IP dst) and the Port src (or the Port dst)
will be displayed from both route directions, i.e. any „src“ value is used as a „dst“ as well (and
vice-versa) by the filter.
○ Protocol type
(available for RADIO, ETH and Internal RADIO (router))
Tick boxes for displaying specific protocols only. "Other" means displaying everything except
the four listed protocols (even non-IP frames in case of the RADIO interface).
■ Interface specific parameters – RADIO
○ Radio IP src
The Radio IP source address of the frame has to be within the range defined:
aaa.bbb.ccc.ddd/mask.
○ Radio IP dst
The Radio IP destination address of the frame has to be within the range defined:
aaa.bbb.ccc.ddd/mask.
○ Headers:
List box: None, Radio Link, Data Coding, Both
Default = None
•
None – only the Radio Link Protocol data is displayed
• Radio Link – Radio Link Control Header is displayed. It contains e.g. frame type, No., Radio
MAC addresses etc.
• Data Coding – Data Coding Header is displayed. It contains information on data part com-
pression, fragmentation and encryption.
• Both – Both the above mentioned headers are displayed.
Note: that it may be quite difficult to locate the original payload in the data part of a Radio Link
Protocol frame. Depending on the operation mode (Bridge vs. Router) and the interface used
by the application (ETH, COM, Terminal Server...), different protocol headers (ETH, IP, UDP...)
may be present and the whole data part may be compressed and encrypted.
○ Promiscuous mode:
List box: On, Off
Default = Off
•
Off – only frames which are normally received by this unit, i.e. frames whose Radio IP des-
tination equals to Radio IP address of this RipEX unit and broadcast frames are processed
further by monitoring filters.
• On – all frames detected on the Radio channel are passed to monitoring filters
○ Link Control Frames
RipEX Radio modem & Router – © RACOM s.r.o. 148
Advanced Configuration