RACOM RipEX 1.12.2, Руководство пользователя

Страница: 106 / 189

Mask*
Default = 255.255.255.0
Network Mask of Radio interface
TX frequency**
Transmitting frequency. Format MHz.kHz.Hz. Step 5 (for 25 kHz channel spacing) or 6.25 kHz (for 12.5
or 6.25 kHz channel spacing).
The value entered must be within the frequency tuning range of the product as follows:
RIPEX-135: 135–154 MHz
RIPEX-154: 154–174 MHz
RIPEX-215: 215–240 MHz
RIPEX-300: 300–320 MHz
RIPEX-320: 320–340 MHz
RIPEX-340: 340–360 MHz
RIPEX-368: 368–400 MHz
RIPEX-400: 400–432 MHz
RIPEX-432: 432–470 MHz
RIPEX-470: 470–512 MHz
RIPEX-928: 928–960 MHz
RX frequency**
Receiving frequency, the same format and rules apply.
Note : By default, the TX and RX frequencies are locked together and change in one field is mirrored
in the other. If clicked, the lock is removed and different TX and RX frequencies can be entered.
Channel spacing [kHz]**
List box: possible values
Default = 25 kHz
The wider the channel the higher the posible Modulation rate.
Note: The 50 kHz channel spacing is available only for HW versions of Radio board higher than 1.1.90.0
or 1.2.50.0. See Status/Radio/HW version.
Modulation rate [kbps]**
• Mode
RipEX allows multiple settings of modulation parameters for every channel spacing to enable
meeting the different regulations which apply in different countries. Naturally different limits on
transmitted signal parameters result in different Modulation rates.
The "Mode" menu conveniently groups the settings optimal for common internationally recognized
standards. The detailed technical parameters for each setting can be found in the RipEX User
manual.
List box: possible values
Default = CE
○
CE
Settings optimized for ETSI standards and similar
○ FCC
Settings suitable for countries which follow the U.S. government group of standards.
RipEX Radio modem & Router – © RACOM s.r.o. 106
Advanced Configuration