Ethernet interface according to the respective standard. These interfaces are described in detail in the
chapter Connectors.
6.5. Radio modem mounting
Radio modem can be either attached by screws to a mounting plate or simply clipped to a DIN rail. In
both cases, the body of the radio modem can be positioned (with respect to the mounting plane) either
horizontally (i.e. sitting on the flat base of the casing) or vertically (i.e. sitting on the narrow side). That
means there are four basic variants of mounting. The variant for which the mounting accessories are
delivered is indicated in the manufacturing code and can be requested in the order by specifying the
code, see Section 5.2, “Labelling of Radio Modems”. When no mounting preference is given, the basic
variant "D" (DIN rail, horizontal) will be delivered.
Fig. 6.7: Horizontal body, DIN rail mount, version D
33
© RACOM s.r.o. – Narrowband radio modem ECONOMY RE400
Radio modem installation
