Installation Instructions
Page 3
Step 3.
Mount Outer Rail Assemblies: Mount both rails in the Rack as shown below.
Step 1a.
For Mounting Depth Greater Than 28.3" [719mm]: Use the
Short CMA Bracket
attached to the rear of the rack (comes attached on CMA arm).
Step 1b/1c.
For Mounting Depth Less Than 18"-28.3" [457mm - 719mm]: Use the
Long
CMA Bracket
attached to either the Rack or the end of the Rail that is sticking
RXWGHSHQGLQJRQ\RXUFRQ¿JXUDWLRQ
Rail Screws
Rear of Rack
Front of Rack
Rail Screws
Short CMA Bracket
Attached to Rack using
Rack mount screws
28.3"-31.5"
[719mm - 800mm]
Long CMA Bracket
Attached to rear or
Rail using 8-32 x
.375" Screws
18.00"-26.4"
[457mm - 670mm]
Long CMA Bracket
Attached to Rack
using Rack mount
screws
26.4"-28.3"
[670mm - 718mm]
1a
1b
1c
Kit Contents for Cable Management Arm
Cable Arm Hardware:
(1) Cable Management Arm Assembly
(1) CMA Bracket Long
(3) 8-32 x .375 Truss Head Screws
Cable Management Installation Instructions
(3) 8-32 Keps Nuts
(1) 8-32 x .250 Pan Head Screws
(2) 8-32 x .188 Pan Head Screws
