Page 2
Kit Contents
Kit Contents
(2) Inner Rail/Shim Assemblies
(2) Outer Rail/Rack Bracket Assemblies
Rail Hardware:
(5) 8-32 Keps Nuts
(5) 8-32 x .375 Truss Head Screws
Rack Hardware Kit (2 bags):
(12) 10-32 Pan Head Screws
(12) 12-24 Pan Head Screws
(12) 12-24 Cage Nuts
(12) 12-24 Square Nuts
Installation Instructions
Step 1.
Attach Rear Brackets: Attach the rear brackets to the outer rail assemblies, using
included 8-32 x .375 truss head screws and keps nuts. Make sure you attach
them at the desired "Mounting Depth".
Step 2.
Rail Attachment: Slide the innertrack of the rail completely out of the outer rail.
You do this by pulling forward on the White Plastic Safety Latch, then out on the
rail. Remove the front Dell Shoulder Nut using a 3/8" wrench, and slide the rail
onto the box. Re-attach the Dell Shoulder Nut which will lock the rail in place.
Repeat for the other side.
Make Sure tabs point in same direction
"Mounting Depth Range 18"-31.5" [457mm - 800mm]
Dell Server
Tabs Point Up
Inner Rail/Shim Assembly
Shoulder Nuts
