Installation Instructions
Page 3
M4 Screws (4x)
(4) 8-32 Flat
Head Screws
Pivot Assembly
Bottom of Monitor
Outer four holes
= 100mm
Step 4.
VESA Monitor Bracket Attachment:
7XUQWKHPRQLWRUIDFHGRZQRQDODUJHÀDW
surface. Locate the four VESA mounting holes on the rear of the monitor.
a. Determine if spacers are required: Some monitors have a "recess" on the rear
VXUIDFH6SDFHUVDUHSURYLGHGWR¿OOWKLVJDS6HH7DEOH$IRUVSDFHU
length options.
b. Determine Screw Length: Only use the metric M4 screws provided. Screw
length is determined by the spacers used (see Table A).
Step 5.
Monitor Bracket Attachment: Remove the main Bracket if it is attached to the wall
before continuing with this step. Mount the Monitor Assembly through the Main
Bracket using the (4) 8-32 Flat Head screws.
Screws and Spacers are Shown to Scale
Recess Depth
Spacer
Screw
0
No Spacer Needed
10mm
.250 (1/4)
18mm
.500 (1/2)
25mm
Table A
