Racing RACTDT5070-A, Оригинальное руководство пользователя

Страница: 11 / 17

11
a.
Filling tank
WARNING! Gasoline is extremely flammable.
Store fuel in specially designed cans for this purpose.
Fill the fuel tank only outdoors and before starting the engine. Do not smoke when
filling the fuel tank or handling fuel.
Never open the fuel tank cap and never add fuel while the engine is running or when it
is hot.
If fuel has spilled, do not start the engine any further, move the tool away from where
the fuel has been spilled, and be careful not to create a spark or flame until the fuel
vapors have dissipated.
Fully close all fuel tank and fuel canisters.
Before tilting the mower to maintain the blade or drain the oil, empty the fuel tank.
WARNING: Never fill the fuel tank indoors, while the engine is running, or before the
engine has cooled down for at least 15 minutes after use.
CAUTION: Do not use unapproved gasoline, such as E15 and E85. Do not mix the oil
with gasoline or modify the engine to operate with alternative fuels. The use of
unapproved fuels will damage the engine parts and will void the engine warranty. To
protect the fuel system from scale formation, add a fuel stabilizer to the fuel. All fuels
are not identical. If startup or performance problems occur, change supplier or fuel
brand.
Fuel must meet the following criteria:
-
Clean, new and lead-free gasoline.
-
A minimum octane rating of 87/87 AKI (91 RON). For use at high altitudes, see below
-
A gasoline containing up to 10% ethanol is acceptable.
-
Remove the fuel tank cap. Add fuel.
-
Close the fuel tank with the cap.
Do not overfill. Wipe off any fuel that has overflowed before starting the engine.
a.
Engine oil
Recommended oil: We recommend the use of high quality detergent oil classified for SF,
SG, SH, SJ or higher. Do not use special additives.
Filling oil tank
-
Open the oil tank.
-
Fill directly the oil in the tank. Do not overfill.
-
Close the oil tank. Wipe any spillage.
Checking the oil level
-
Check the oil level when the engine is off and horizontal.
-
Remove the plug / dipstick from the oil tank and
wipe it off.
-
Insert the oil tank plug / dipstick into the tank
neck as shown, without screwing it in, and then
remove it to check the oil level.
-
If the oil level is near or below the lower limit of
the dipstick, remove the dipstick and fill the
recommended oil reservoir up to the upper limit
of the dipstick (bottom edge of the dipstick). Do
not overfill.
-
Replace the oil tank plug / dipstick.
5.
USE