Attention!
To keep children safe, do not leave packaging parts (plastic bags, cardboard
boxes, expanded polystyrene elements etc.) freely accessible. Danger of suffocation!
3.3 TECHNICAL DATA
Tension
230-240V~, 50Hz
No load speed
0-2800/min
Rated power
710W
Stroke length
20mm
Cutting capacity
150mm in wood / 10mm in metal / 18mm in Alu
Sound power level
L
wA
: 105,1dB(A) K=5dB(A)
Sound pressure level
L
pA
: 97,1dB(A) K=5dB(A)
Vibration
Cutting board mode:
- Front handle a
h,B
: 8,521 m/s²
- Rear handle a
h,B
: 7,433 m/s²
Cutting wooden beams mode
- Front handle a
h,WB
: 7,630 m/s²
- Rear handle a
h,WB
: 6,530 m/s²
K= 1,5m/s²
INFORMATION
The declared vibration total value(s) and the declared noise emission value(s) have been
measured in accordance with a standard test method and may be used for comparing one tool
with another.
The declared vibration total value(s) and the declared noise emission value(s) may also be used
in a preliminary assessment of exposure.
WARNING!
The vibration and noise emissions during actual use of the power tool can differ from the
declared values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trigger
time).
Wear hearing protection.
4. OPERATION
4.1 SAW ASSEMBLY/DISASSEMBLY
a) Make sure that the tool is disconnected from the power source.
b) Select the blade suitable for the material to be cut.
c) Turn the blade clamp sleeve(4)ca40°counter-clockwise and hold it in that position.
07
