24
o
Always check the machine before and after the use. In case of malfunction or damaged parts,
do not use the tool and bring it to a qualified service for inspections and reparations.
o
Do not repair the tool by yourself.
o
Only use original accessories and spare parts. Contact our service or your dealer to know the
recommended parts/accessories to use.
b)
Cleaning
o
Clean the plastics parts with a soft and clean cloth and dry the housing carefully. Do not use
aggressive cleansing agent (solvent, abrasive cleansers) or an abrasive sponge or any sharp
objects.
o
Do not use any caustic chemical to clean the plastics parts.
o
Never put or immerse the product in water or any liquid, and ensure that water does not
penetrate the tool. Never splash with water or clean with the high pressure hose! Do not clean
under running water.
o
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating oil and spray a thin layer of protective oil on the whole blade.
o
Always keep the ventilation slots in motor housing clean. Clean ventilation holes with soft
brush.
a.
Storage
Keep product, user manual and accessories in the original packaging.
Clean tool before storage.
Always lubricate the cutter blade with protective oil spray storage.
Store the machine with supplied cutter blade protection cover.
It is recommended to store the product in a clean, dry location, protected from humidity, frost
and dust, and keep it out of children’s reach (e.g. high or in a locked up place).
Do not store product in temperatures lower than 0ºC (32ºF).
6.
DISPOSAL
Electrical products should not be discarded with household products.
According to the European Directive 2012/19/EU on waste electrical and
electronic equipment and its implementation into national law, electrical
products used must be collected separately and disposed of at collection
points provided for this purpose. Talk with your local authorities or dealer
for advice on recycling.
