Racing RAC450EPHT-UK, Инструкция по эксплуатации

Страница: 12 / 16

12
b. Cutting techniques
•
Move the vertical section of the electric hedge trimmer evenly forward or do curved movements up
and down.
•
In order to keep long straight lines, we recommend stretching cords.
•
It is recommended to cut hedges into trapezoidal shape to avoid lower branches getting naked.
Doing so corresponds to the natural growth of plants and hedges can thrive optimally. Cutting
reduces new annual shoots, so a dense branching and a good sight protection need to be
considered.
•
Cut the edges of a hedge first. Move the hedge trimmer to cut the part which grows greatly from
bottom to top. If you cut from top to bottom, the thinner branches will move to the outside; thin
places or holes may arise.
•
Then cut the top of the hedge, just like a roof or round shape.
•
Trim out the young plants to the desired shape. The main stem should be intact and remained until
the hedge reaches the proposed height. All other shoots can be cut at half.
c. Safe working
•
To guarantee a safe working, put the tool in a position of 60º ±10, as described in below
illustration.
•
Never use the electric hedge trimmer when you are standing on a ladder or a stable ground.
•
Do not begin to cut without enough preparation. Otherwise it could lead to danger to you or
others.