Racing RAC1036ET, Руководство пользователя, Страница: 8 / 24

7)ELECTRICAL SAFETY
a)The mains voltage must correspond to the one
marked on the technical data plate (230V~50Hz).
Do not use other sources of power.
b)The use of a safety circuit-breaker is recommended
for the power supply line for an intervention range of
10 to 30 rated mA. Consult a reliable electrician.
c) Never pass the device over the extension cable that
the application is working, as this could cut the cable.
Mark sure you always know where the cable is.
d)Use the special cable holder for the connection of the
extension cable.
e)Never use the device when it is raining. Try to prevent
it from getting wet or being exposed to humidity. Do
not leave it outside overnight. Do not cut damp or wet
grass.
f) The power supply cable should be checked regularly
and before using it each time, make sure the cable is
not damaged or old out. If the cable is not in good
condition, do not use the device; take it to an
authorized service center instead.
g)Only use an extension cable that is suitable for
outdoor work. Keep it away from the cutting area,
from damp, wet or oily surfaces or with sharp edges
and away from heat and fuels.
h)The mobile socket of the extension cable should be
splash proof in compliance with DIN 57282 and VDE
0282 regulations; the cross-section of the wire (max.
length 75 m) should be at least 1.5 mm
2
. Use
H07RN-F harmonized cable.
i) If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
j) CAUTION: In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external
switching device, such as a timer, or connected to a