3
Connection to the
Mains Supply
Check that the voltage marked on the product
corresponds with your supply voltage.
This product is fi tted with a 13A plug complying with
BS1363. If this plug is unsuitable or needs to be
replaced, please note the following:
This product is double insulated and therefore does
not require an earth connection.
Important
: The wires in the mains lead are coloured
in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
This appliance is fi tted with a plug which has a
13 amp fuse. Should the fuse fail, then it must be
replaced with an ASTA approved fuse (conforming to
BS1362) of the same rating. If you need to replace the
plug or if the plug is of the incorrect type for your
socket, remove it and replace it with an appropriate
plug.
Dispose of the old plug safely.
Important
: The wires in the mains lead are coloured
in accordance with the following code:
Blue=neutral, Brown=live
As the colours of the wires in the mains lead may not
correspond with the coloured markings in your plug,
proceed as follows:
Connect the
BROWN
wire to the terminal marked
‘L’
or coloured
RED
.
Connect the
BLUE
wire to the terminal marked
‘N’
or coloured
BLACK
.
NOTE
:-The ‘L’ or ‘N’ wire must NOT be
connected to the
EARTH
terminal marked
‘E’
or coloured
GREEN
or
GREEN
and
YELLOW
.
If in doubt consult a qualifi ed electrician who
will be pleased to do this for you. This product
conforms to EC Directive 92/31/EEC with
respect to
Electromagnetic Compatibility.
NON-REWIREABLE MAINS PLUG
If your appliance is supplied with a
nonrewireable
plug fi tted to the mains lead, you will fi nd that it
incorporates a fuse, the value of which is
indicated either on the base of the plug or
on the fuse carrier. Should the fuse need
replacing, you must use an
ASTA approved one (conforming to BS1362) of
the same rating.
If the fuse cover is lost, the plug must not be
used until a replacement is obtained from an
electrical supplier.
If you need to remove the plug, cut it from
the mains lead and immediately dispose of it.
Never attempt to re-use this plug or insert it into
a socket outlet as there is a very great risk of
an electric shock.
PLEASE NOTE: ALWAYS ENSURE
THE BLENDER IS SWITCHED OFF
AND IS DISCONNECTED FROM
THE POWER OUTLET BEFORE
ASSEMBLING OR DISASSEMBLING
PARTS AND BEFORE CLEANING
