Racer INVERTER 11, Руководство пользователя

Страница: 55 / 108

- 52 -
ATTENTION: This manual includes all the necessary information with the use and the
installation of your heat pump.
* The installer must read the manual and attentively follow the instructions in implementation and
maintenance.
* The installer is responsible for the installation of the product and should follow all the instructions of the
manufacturer and the regulations in application. Incorrect installation against the manual implies the
exclusion of the entire guarantee.
* The manufacturer declines any responsibility for the damage caused with the people, objects and of the
errors due to the installation that disobey the manual guideline. Any use that is without conformity at the
origin of its manufacturing will be regarded as dangerous.
INDEX
1. Transport advertising
2. Dimension
3. Specifications
4. Accessories
5. Installation and connection
6. Electrical wiring
7. Initial operation
8. Troubleshooting
9. Exploded diagram
10. WIFI operation
11. Maintenance
Thank you for using RACER INVERTER swimming pool heat pump for your pool heating, it will heat your pool
water and keep the constant temperature when the air ambient temperature is at -7 to 43
℃
.
WARNING:
*Please always empty the water in heat pump during winter time or when the ambient temperature drops below
0
℃
, or else the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will
be lost.
*Please always cut the power supply if you want to open the cabinet to reach inside the heat pump, because
there is high voltage electricity inside.
*Please well keep the display controller in a dry area, or well close the insulation cover to protect the display
controller from being damaged by humidity.
Important notice:
- Please always keep the heat pump in the ventilation place and away from anything which could
cause fire.
- Don’t weld the pipe if there is refrigerant inside machine. Please keep the machine out of the
confined space when make gas filling.
- The pipe must be vacuumed before filling R32 gas from the shut off valve inside machine.
- Action of filling gas must be conducted by professional with R32 operating license.