Racelogic VBOX Touch Скачать руководство пользователя страница 85

Страница: 85 / 115

UTC Offset Selector Example

•

Daylight Saving:

When '

Enabled

', this setting will add +1:00 hr on to the local time setting. '

Disabled

' by default.

Note: The setting cannot be changed if the unit is moving or logging, if you try and change the setting, a warning
message will appear.

•

Leap Seconds:

The leap second value is set as '

18 s

' by default and can be changed if required using the keypad

presented when the current value button is pressed. This was increased to 18 seconds as of December 2016 -
more information on this is available

here

Note: The setting cannot be changed if the unit is moving or logging, if you try and change the setting a warning
message will appear.

To save the value inputted, press the

Confirm Button

on the bottom right of the screen, or press the

Cancel Button

on the bottom left of the screen to return the Time Settings screen without saving.

Note: The maximum input value is 99.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/05_-

_VBOX_Touch_Settings

Содержание VBOX Touch




















































































































Результаты поиска

Содержание VBOX Touch

Отзывы:

Racelogic VBOX Touch, Руководство пользователя, Страница: 85 / 115

Результаты поиска

Содержание VBOX Touch

Отзывы: