Racelogic VBOX Mini, Руководство пользователя

Страница: 31 / 61

The screen will then count down to 0 and revert to the normal lap timing screen:
If an arrow button has been pressed in error this count down allows you to abort the setting of the start finish line,
whereupon the lap times will be calculated according to any previous start/finish points that may have been set.
As soon as the start / finish line is crossed again, lap timing will begin. The lap time will be displayed at the end of the
second lap along with the current best time in the top right and the lap count in the top left of the screen.
Lap Count
A count of the number of completed Laps is displayed in the top left corner of the Lap timing screen.
To reset the Lap count and the Best Lap time, press the RESET button.
Lap Timing Including Split Points
This method allows for the setting of a start/finish line, up to six split points, and a separate finish line if the course being
driven is of a sprint or hill-climb type. Due to the fact that it requires several button pushes it is best employed in a non-
race session.
• Firstly set the start/finish line and splits or load a previously saved set from the SD card (see Setting Start/finish and
Split Lines below).
• If you want to save your lap times to a file, insert an SD card.
• Drive around the circuit, your times will automatically appear on the VBOX Mini display:
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
31