06 LED Behaviour – VBOX LapTimer
Delta-V LEDs
The two front panel LEDs are used in predictive lap timing mode. They indicate if the current vehicle speed is faster or
slower than the speed was at the same position in the reference file.
The LEDs will show
red
if the current speed is slower than the reference, or
green
if the current speed is faster.
The value defined within the ‘Delta-V range’ setting dictates the min. and max speed values to full brightness.
The two LEDs act as a gauge, filling up from the left to right. Once the current speed is slower or faster than the
reference, the left LED will illuminate. Once the current speed is above 50% of the defined positive or negative range,
the LED on the right will also illuminate.
Combo G LEDs
While the screen still displays the Delta-T for each lap, you have an optional mode that takes over the function of the
LEDs in the predictive lap-timing screen.
If the Combo G is greater than a selected minimum threshold (50 % LED minimum %, 0.5 g default), the LEDs will light
up various colours dependent on the maximum g threshold selected (1.0 g default).
• The LEDs will show
red
where the Combo G has reached the LED minimum % selected (i.e. 50% by default).
• Above this minimum value, the LEDs will show a colour gradient between
red
and
green
,
giving a changing
yellow/
orange
colour, dependent on the live Combo G value.
• The LEDs will show
green
where the Combo G is equal to or greater than the selected maximum g threshold.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/06_LED_Behaviour_%E2%80%93_VBOX_LapTimer
46
