Split line display
If you have set up split line in the Lap Timing menu, the LapTimer will display split times for 2-20 seconds when you
cross the split line. Set Split Time Display Period to find information on how to set this up.
Setting a start/finish line
You can also set a new start/finish line while using the
Lap Timing screen by pressing the square button. If you
do this by mistake, you can cancel the action by
pressing the ▼button within 5 seconds.
If you also require split lines or a separate finish, use the
‘set start and splits’ option in the Lap Timing Menu.
Note: The vehicle must be moving >10 km/h before you
can set a Start/Finish Line.
Speed
In Speed mode, the screen will display a large clear
speed value with up to 2 decimal places. You can set
the speed to display in kph, mph or knots. You can
adjust the number of decimal places displayed. For more
information on how to change these settings, see
Note: To start or stop data logging on the VBOX LapTimer, press the square button when in Speed Display mode.
https://en.racelogic.support//Product_Info/Lap_Timing_and_Pit_Timing/VBOX_LapTimer/
User_Guide_%E2%80%93_VBOX_LapTimer/04_Display_Modes_%E2%80%93_VBOX_LapTimer
20
