Racelogic Speed & Route Profiler, Руководство пользователя

Страница: 8 / 24

17/11/2010 |8
3.3 Main screen
When you have loaded a VBO file, and repaired all the GPS dropouts, you will see the screen as below, with
the filename displayed at the top, in this case “Bucks Town Plus1.vbo”.
The screen is split into three segments;
detail map , point setup and route summary .
The first segment, referred to as the
detail map requires that you have an internet connection and it shows
the first part of your route zoomed in and superimposed over a Microsoft Bing map. You will note a number
of place markers which are the digital inputs logged on the reference driver’s route.
The second segment is on the top right of the screen and this shows information about the
point setup . This
determines what instructions should be given to a driver when he arrives at this point, and what warning
should be given before arriving at this point.
On the bottom right of the screen can be seen the third segment which shows a
route summary with all the
logged points shown.

Red markers denote a point for which there is no point setup information.

Green markers show points which do have data regarding point setup.

Blue point, shows the currently selected point – in this case point number 1.

Yellow circle on the Route Summary , shows where the detail map is currently centred on, this may
not be on any point – as here.