Gate Width
You can change the width of the Start/Finish line gate by
pressing on the value box and using the presented
keypad.
To save your chosen width, press the
Confirm button
at the bottom right of the screen. Press
the
Cancel button
at the bottom left of the screen to
return to the Settings screen without saving. The default
setting is 25 m / 82 ft and it is selectable from 3 to 100 m
/ 10 to 330 ft. The value will be remembered after each
power cycle.
Note: You can enter the width with up to 1 decimal
place.
Gate Width Keypad Example
This option is particularly useful if Performance Box Touch is not detecting the correct number of laps. When racing at a
very narrow circuit where the pit lane is right next to the start line, it could be possible to trigger lap timing in the pit lane,
giving an incorrect number of laps.
Rolling Lap Time
If you enable Rolling Lap Time, both Lap Timing Screens will display the current live lap time. When a new lap starts, the
previous lap time will be displayed for 5 seconds before it reverts to display the current live lap time. When it is disabled,
it will only display the previous lap time.
Note: This feature is enabled by default.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
_Performance_Box_Touch_V2
23
