background image

4

RaceAmerica Model 6632E Display Timer

PRODUCT OVERVIEW

The Model 6632E  twenty-four inch digital 

Display Timer is a micro-processor controlled 

system based upon the 7-segment format display 

digit using the latest technology Ultra-Bright 

LEDs.  The 6632E Display Timer is a standalone 

integrated Timer and Digital Display with live 

running time.  Model 5140 Infra-red Track Sensors 

located on the race track relay start and stop signals 

to the 5432E for timing purposes.  The system 

operates on  simple push-button operation for 

Reset (Clear) and Sensor alignment or via optional 

wireless control.  Output can be captured with PC 

Ccontrol software via a wireless transceiver.

RaceAmerica offers Display Timers in five, 

eight, fifteen and twenty-four inch digits.  The 

display is viewable at wide angles and in full sun.  

The Sensors operate in a wide range of conditions 

from total darkness to full sun and are available 

with operational ranges of 50’, 75’ and 150’.  Time 

connfiguration format and display brightness are 

configurable.

A wireless option allows a PC to control the 

timer and receive the data.

NOTE:  THIS PRODUCT USES ULTRA-

BRIGHT LED TECHNOLOGY.  DUE TO THE 

BRIGHTNESS LEVEL OF THIS DISPLAY, 

CARE SHOULD BE TAKEN, AS WITH ANY 

BRIGHT LIGHTING SOURCE,TO AVOID 

PROLONGED VIEWING AT CLOSE RANGE 

AND SHORT DISTANCES.  AS WITH ANY 

BRIGHT LIGHTING SOURCE, VISION MAY 

BE AFFECTED SHORT TERM SIMILAR TO  

CAMERA FLASHES.

THEORY OF OPERATION

The Model 6632E Large Display Timer is a 

standalone elapsed time (separate start and finish 

points) timer and large digital display with an 

interconnect cable to connect the Infra-red Sensors 

and the hand-held push-button.  The display timer 

contains an alignment mode to insure alignment 

of the sensors to the respective emitters at each 

location on the track.

Pressing the push-button resets the display 

and places the display timer into a ready mode.  

When the vehicle passes between the start emitter 

and start sensor ‘breaking’ the start beam, the timer 

begins to count and displays the elapsed time in 

four different formats from seconds and fractions 

(ss.fff or sss.ff) to minutes/secons/fractions 

(mm:SS.F) and hours/minutes (HR:MM-).  

When  the  vehicle  breaks  the  finish  beam,  the 

timer displays the elapsed time in the configured 

format.  The timer is accurate to one thousandth 

of a second.

The timer will not reset for a run if either of 

the sensors are out of alignment.

PACKAGE COMPONENTS

 

1 - 15” digit Display Enclosure

2 - Hanger Plates

2 - 5140 Track Sensors

2 - 5040 Infra-red Beam Emitters

3 - Track cables - Start/Finish/Display sections

1 - Push-button cable

1 - Owner’s Manual

Model 6632E Available Options:

6501A  12VDC/3A AC Power Adapter

6401B Permanent Installation Kit (includes AC)

Emitter options:

 

50ft range - Model 5040 (standard)

 

75ft range - Model 5050

 

250ft range - Model 5060

‘W’ suffix - Domestic USA Internal Wireless

      Datacomm link

‘X’ suffix - International Internal Wireless

      Datacomm link

4520A Domestic Wireless Data Comm Links

4620A International Wireless Data Comm Links

Note:  Wireless networks require a minimum 

of two transceivers; one must be internal in a 

display.

LOCAL REQUIREMENTS

Additional items required to operate the 6632E 

Display Timer and options:

1 - 12VDC/2A Power source

1 - Mounting structure

Содержание 6632E











Отзывы: