![Race Technology DL1 MK3 Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/race-technology/dl1-mk3/dl1-mk3_instruction-manual_3129798011.webp)
11
Race Technology Ltd. VAT reg. 715 9671 09
After 12, King Street, Eastwood, Nottingham, NG16 3DA, UK
Tel: +44 (0) 1773 537620 Fax: +44 (0) 1773 537621
Email: [email protected]
Alternatively, the DL1 CLUB can be powered from a separate battery if required - this
is often appropriate for temporary installations where a cigar lighter is not available. The
DL1 CLUB requires a minimum of 10v and draw about 100mA-200mA, so the size of
the battery should be chosen to give sufficient run time. For example a 1Ah battery
would give about 5 hours operation. Because of the current supply requirements only
rechargeable batteries should be used, you cannot use disposable batteries. If you do
require a battery pack, Race Technology keeps a wide selection in stock - call us with
your requirements.
Start the vehicle, wait a few seconds then connect the power lead to the unit. After a few
seconds, the "Power" LED will come on and when the unit is ready to log the "status"
light will flash. Wait for a few minutes to enable the GPS to obtain a good positional
lock. Once the receiver has a lock, the GPS status light on the DL1 CLUB will start
flashing.
3.3
Further reading
For more information, read the following sections:
•
Fitting a cable to the black connector that is used to power the DL1 CLUB (section
8.6)
•
Connecting a switch to start or stop the DL1 CLUB (section 8.3)
Содержание DL1 MK3
Страница 1: ......