RACCEWAY e-city 21, Руководство пользователя, Страница: 15 / 68

TROUBLESHOOTING
Problems Condition Control Solution
When I turn on
the electric
scooter, nothing
happens.
There is no light
on the display
1. Turn the main switch to
the "ON" position
2. Fasten the connectors
1. Check that the
main switch under
the seat is turned on
(in the "ON" position).
2. Check the power
connection and
battery level.
2.The power
light is on 3.Check the
battery and motor
connections
3. Clean and accept battery
connectors.
4. Fasten the connection of
the motor 1 control unit"from
the seat
3. The power
light is on and
the brake light
is on..
4. Check that the
handbrake handle
does not return to
the starting position.
5. Battery voltage is
less than 42 volts.
5. Release the brakes, if
corroded, replace it Contact
the supplier.
6. Charge the battery nllhji
replace Take care of the
supplier.
2. Check the handle
for damage.
3. Check the throttle
spring
4. Check that the
throttle handle is
loose
1. Use a flat screwdriver
to adjust the gap between
the rubber handle and the
cover.
2. Adjust the position of
the gas spring Contact the
supplier
3. Check the gas
connection Contact the
supplier.
The charger light
is off
DRIVING D
ISTANCE IS LOW
1. Bad connection
between the charger
and the battery
2. The charger does
not charge
1. Check the position of
the charger connector
2.
3. 2. Replace the charger
The battery
drains quickly
1. The connection
to the battery is
not good
2. Bad battery
1. Check all connections to
the battery
2. Replace the bad battery
Brakes are not
working
properly
1. The brake
handles do not
engage
2. No braking
power
1. Adjustment is
necessary
2. Brake pads are
dirty or need to be
replaced
1. Adjust the brake cable
according to the instructions
2. Clean the brake pads with
the help of sandpaper n
The gas handle
does not work,
the vehicle
moves without
acceleration
The throttle
does not
return to the
STOP
position.
1 4