NATIONAL INTERAGENCY INCIDENT COMMUNICATIONS DIVISION
THALES 25 PORTABLE RADIO (RACAL) CLONING INSTRUCTIONS
Page 3 of 4
RACAL CLONING INSTRUCTIONS
CLONING PROCEDURES
1.
Turn both radios on.
2.
Connect Source end of cloning cable to Master Radio.
(See Figure 8)
3.
Connect Target end of cloning cable to Slave/Target Radio.
Master radio automatically detects the target radio, and brings up the Cloning Main Menu.
(See Figure 1)
Note: If a non-Fire Feature target radio is connected, the only cloning option is to clone all channels, zones,
and banks.
4.
Scroll down using the "
O
" key through the Cloning Main Menu.
5.
Use the " " (
) key to select or de-select cloning features.
GLOBAL DATA:
ALL ZONE:
EVENT CLONE:
FULL EVBANK:
TX SQL LIST:
TALKGP LIST:
Press the "
PTT
" button to send data to clone radio.
(See Figure 3)
Press the "
PTT
" button to send data to clone radio.
(See Figure 3)
Press the "
ENTER
" key.
(See Figure 3)
Select "
SELECT ZONES
" and press the "
ENTER
" key.
(See Figure 4)
Select w hich Invent Zone w ill be cloned in the "
Target
" radio and press "ENTER".
(See Figure 5)
Select w hich Zone w ill be cloned from the "
Source
" radio to the "
Target
" radio by scrolling through
the available zones and press the "
ENTER
" key.
(See Figure 6)
Press "
ESC
" once to return to the "
Start Cloning
" menu.
Select "
START CLONING
" and press the "
ENTER
" key.
Press the "
PTT
" to dow nload to the "
Target
" radio.
Note: When performing an "EVENT CLONE", the user can only select zones for that current
bank. If Zones 17, 18, or 19 need to be cloned over to the "Target" radio, the user must first
select the"Event Bank" on the M aster radio before connecting the cloning cable in order
to select these zones.
Press the "
PTT
" button to send data to clone radio.
(See Figure 3)
Press the "
PTT
" button to send data to clone radio.
(See Figure 3)
Press the "
PTT
" button to send data to clone radio.
(See Figure 3)
6.
Select desired cloning process; "
GLOBAL DATA
", "
ALL ZONE
", "
EVENT CLON
E",
FULL EVBANK
", "
TX SQL LIST
",
or "
TALKGP LIST
" and press the "
ENTER
" key.
Cloning Cable
Source/Master Radio
Target/Slave Radio
Figure 1
Figure 8
7.
Once the clone is complete, the "
Target
" radio will indicate which zone or zones where cloned over.
(See Figure 7)
8.
Disconnect "
Target
" radio and connect any other "
Target
" radios that need to be cloned.
GLOBAL DATA:
ALL ZONES:
EVENT CLONE:
Cloning Procedure For Each Cloning Feature
FULL EVBANK:
TX SQL LIST:
TALKGP LIST:
Clones all buttons, toggle sw itch settings, and scan configurations.
Clones all Bank and Zone information in radio, including the "
Event Bank
"
Clones either one of the event zones (17,18, or 19) or can select all event zones to clone.
Clones all zones, channels in the event zones (17,18, 19).
Clones Analog/Digital Transmit Squelch tone pick list.
Clones talk group list (
DIGITAL Only
).
Selectable Cloning Features:
(See Figure 1 & 2)
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
NIICD RADIOS ONLY 2007/J.Lopez
