Racal Instruments 1260 VXI, Руководство пользователя

Страница: 39 / 63

1260-145 User Manual
Racal Instruments

2003 Module Operation 3-1
Chapter 3
MODULE OPERATION
Setting the
Module Address
The Option-01T switch controller identifies each Adapt-a-Switch
plug-in or conventional 1260-Series module by a
module address
that is unique to that module. The module address is a number
from 1 through 12, inclusive.
The module address assigned to the 1260-145 depends on the
carrier slot into which the 1260-145 is inserted, and on the position
of the logical address DIP switch on the carrier side panel. The
switch has two settings:

1-6 (closed): When the switch is set to this position, the module
addresses of the plug-ins in the 1260-100 Carrier are from 1
through 6. The module with address 1 is in the left slot of the
top row. The plug-ins are addressed in the following pattern:
Front View – Module Addresses for 1 through 6
•
7 - 12 (open): When the switch is set to this position, the
module addresses of the plug-ins in the 1260-100 Carrier are
1
2
3
4
5
6