background image

1260-100/101 Adapt-a-Switch Carrier Module User Manual 

Racal Instruments 

 1998 

 

Overview 1-3 

FEATURES 

 

Compatibility 
with Racal 
Instruments 1260-
Series 

The 1260-100 /101 Adapt-a-Switch Carrier uses the same 
Option-01T controller as conventional Racal Instruments 
1260-Series switch modules.  A single Option-01T Switch 
Controller Module may control up to twelve switch modules or 
plug-ins.  This may include a combination of 1260-Series and 
Adapt-a-Switch plug-ins. A single Option-01T will not control more 
than one 1260-101. 

See 

Chapter 2: Getting Started

 for instructions on combining 

1260-Series modules and Adapt-a-Switch plug-ins in the same 
VXIbus chassis. 

 

Ease of Use 

The 1260-100/101 includes several ease-of-use features (the 
1260-100 model is shown in Figure 1-3): 

• 

Plug-ins are easy to insert and extract from the front panel of 
the 1260-100/101, even while it is installed in a chassis. 

• 

For only the1260-100, module addresses, used to uniquely 
identify each plug-in, are set by a single DIP switch that is 
easily accessible from the side panel of the 1260-100.  See 

Setting Configuration Switches

 in 

Chapter 2: Getting 

Started

 for instructions. 

• 

The 1260-100/101 ejector handles also function as injectors, 
making it easy to install the carrier into a VXIbus chassis. 

 

Maintainability 

Maintainability of the 1260-100/101 is enhanced by the fact that 
plug-ins are removable from the front panel.  This has the following 
benefits: 

• 

The mean time to repair (MTTR) is minimized, since the carrier 
does not need to be disassembled or even removed from the 
VXIbus chassis. 

• 

The switch system may be easily upgraded in the field by 
adding or changing plug-ins. 

• 

Sparing is less costly and more flexible, since individual plug-
ins may be spared rather than the entire 1260-100/101 module.

Содержание 1260-100






















































Отзывы: