HOW TO AVOID DAMAGING SURFACES
Damage to cleaning surfaces occurs
because the impact force of the water
exceeds the durability of the surface. Never
use a narrow high impact stream or a turbo/
rotary nozzle on a surface that is susceptible
to damage. Avoid spraying windows with a
narrow high impact stream or turbo nozzle
as this may cause breakage. The surest
way to avoid damaging surfaces is to follow
these steps:
Before triggering the gun, adjust the nozzle
1.
to a wide fan pattern.
Place the nozzle approximately 4-5 feet
2.
from and angled at 45 degrees to the
cleaning surface and begin spraying.
Vary the fan pattern spray angle and the
3.
distance to the cleaning surface until
optimum cleaning efficiency is achieved
without damaging the surface.
TURBO NOZZLE
A turbo nozzle, sometimes referred to as
a rotary nozzle, is a very effective tool that
can significantly reduce cleaning time. The
turbo nozzle combines the power of a narrow
high impact stream and the efficiency of a 25
degree fan pattern. This swirls the narrow
high impact stream into a cone shape that
cleans a larger area.
CAUTION:
Since a turbo nozzle uses a
narrow high impact stream, only use it in
applications where the cleaning surface
cannot be damaged by a narrow high
impact spray. Note: The turbo nozzle is NOT
adjustable and cannot be used to apply
detergent.
Rotary brush
Before using the rotary brush:
Ensure that the brush is clean and free
a.
from debris.
Ensure that the surface to be cleaned is
b.
sound and is suitable for being cleaned
by the vigorous rotary action of the brush.
If you are unsure, check on a small
inconspicuous area first.
Important - Any grit on the surface to be
c.
cleaned or in the brush can cause damage
to the surface as it is being cleaned.
-7-
WARNING
Содержание RACHP2000
Страница 13: ......
