SAFETY AND WARNING INFORMATION
General Safety Rules
WARNING:
Read the instructions fully before using the product for the first time. Failure
to follow the instructions may result in fire, electric shock and or serious injury.
We recommend the user wears safety equipment during use.
We recommend the product be used with a RCD (Residual Current Device).
Please Retain These Instructions For Future Use And Referral
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
•
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
•
When operating the unit in high pressure mode the lance may cause kickback. Therefore please ensure
that you hold the spray gun firmly. When using the unit we recommend that other people are at least 10m
away from the working area.
High-pressure jets can be dangerous if misused. The jet MUST NOT be directed at yourself, other
•
people, animals, live electrical equipment or the pressure washer itself. The trigger gun safety lock
prevents the trigger from accidentally being engaged. This safety feature does not lock trigger in the ‘on’
position.
Do not use the pressure washer if the supply cord or other important parts are damaged (e.g. high
•
pressure lance or hoses). Never carry your pressure washer by the cord.
Do not disconnect the high-pressure hose whilst the system is under pressure. This system is capable
•
of producing 1600PSI. To avoid rupture and injury, do not operate this pump with components rated less
than 1600PSI working pressure (including but not limited to spray guns, hose and hose connections.)
Do not use acids or flammable liquids in the machine.
•
When using a pressure washer always ensure that your water connection is protected by a backflow
•
preventer (as per water byelaws). This will avoid possible contamination of your water supply. Use cold
water feed only.
Protect the unit against freezing, avoid storing the machine where it may be susceptible to frost.
•
Prior to starting the pressure washer in cold weather, be sure ice has not formed in any part of the
•
equipment.
The unit must continuously run with water. Dry running will cause serious damage to the seals.
•
IMPORTANT:
The pressure washer is equipped with an auto stop device. When the trigger is released it will
open the power circuit to the motor and cause the pressure washer motor to stop. The motor will resume
when the trigger is pulled. The pressure washer is also equipped with a main power ON/OFF switch located
on the unit. It should always be moved to OFF position when the pressure washer is not being used.
This product is a class II product-double insulated. No means of grounding (to earth) is provided on this
product nor should it be added. Only a qualified person should carry out servicing. If an extension lead is to
be used with this product, please ensure:
Use only extension cords that are intended for outdoor use.
Completely unwind the cable from the drum to allow for full current rating of the extension cable.
To reduce the risk of electrocution, keep all connections dry and off the ground.
Do not touch plug with wet hands
Hose: Water supply hose must be at least ½" in diameter with a minimum recommended length of 7.5
meters and be fitted with a suitable coupling that matches the male quick fit connector.
Use only original spare parts from the manufacturer or approved by the manufacturer.
•
WARNING:
•
High pressure hoses, fittings and couplings are important for the safety of the appliance. Use
only hoses, fittings and couplings recommended by the manufacturer.
-1-
Содержание RACHP2000
Страница 13: ......
