-5-
OPERATING INSTRUCTIONS
Note:
Before connecting to the mains power supply
please ensure that the ON / OFF switch (1)
is in the OFF position and the water supply is
connected and is turned on.
WARNING:
Running the pressure washer without
any water supplied to it will damage the pump.
1
Instructions for use
a) With the unit fully assembled, ensure that the
unit is switched OFF and is connected to the
mains supply and the water supply. Pull the
trigger a few times to expel any air trapped in
the system.
b) Ensuring that the trigger is released, switch ON
the pressure washer. The unit is now ready to
operate by pulling the trigger.
Note:
The motor only runs when the trigger is operated.
When the pressure washer is not in use, actuate
the trigger gun lock for safety reasons . Switch the
unit OFF when not in use for extended periods of
time. Never operate the pressure washer without
the water supply connected and turned on.
Trigger
Gun Lock
Helpful Hints
Before starting cleaning remove any objects which
could create a hazard.
Ensure that all doors and windows are closed
(where appropriate).
The adjustable lance allows you to use a variety of
spray patterns from a fan to a pencil jet.
When using the pressure washer to clean decking,
patios, vehicles, etc., always start by using the
fan spray and begin spraying from a minimum
30cm away to avoid damaging the surface of the
material to be cleaned.
Warning:
Always check that NO damage can
occur to the items you are intending to clean.
Always use safety wear for your personal
protection.
General applications for this product are domestic
cleaning tasks: Cars, motorbikes, caravans, and
boats
Patio’s, fences, garden walls, pathway, driveways
– particularly block driveways Roofs, brickwork
and guttering Garden tools, furniture and
barbecues Animal pens
Brushes
Your RAC pressure washer is supplied with a
rotary brush (6) and a fixed brush (14). Both
have soft bristles and are ideal for cleaning car
bodywork, windows etc.
The brushes connect directly to the Trigger gun
(9).
