Set the Date / Time
The time and date will automatically update after the Dash Cam has recevied
a GPS signal. The letters GPS in the top left of the screen will turn from red to
green once a GPS signal has been acquired. You may need to adjust the time
zone settings in the menu if the displayed time is not correct.
Mode Selection
Using the Dash Cam
Recording Videos
www.proofcam.com
06
Auto Update
Manual Update
Press REC button to stop recording;
Press Menu button to enter menu settings and the first menu;
Press Menu button twice to enter the third menu;
Press the Up / Down buttons to select Clock settings;
Press REC button to enter the Clock settings;
Press Up / Down buttons to change values, then when complete, press
REC button to return to the menu settings;
Press Menu button until the Dash Cam exits the menu function and
returns to the Home screen;
Press REC button to resume recording.
The defualt setting is Video Mode . Long press Menu button to switch
to Still Capture Mode , press Menu button can switch to Front
camera Playback Mode , press Menu button can switch to Rear
camera Playback Mode , press Menu button can switch to Picture
viewing Mode .
.
Before starting to record, please ensure that the Micro SD card (included) is
inserted. If you are using the Dash Cam for the first time it will be pre installed
in the slot. When using the Dash Cam in the UK, you will need to adjust the
“Protect Level” settings to LOW. Press REC button to start recording, the
video recording icon flashes on the screen. The recorded files are saved to
the Micro SD card. To stop recording, press REC button again. With the
car charger connected the Dash Cam will automatically turn on and start
recording when the car engine starts. When the engine stops, the Dash Cam
will automatically save the last file and turn off.
•