RabbitCore RCM2200, Руководство по началу работы

Страница: 9 / 34

Getting Started Manual Hardware Setup 2–1
Hardware Setup 2
This chapter describes the RCM2200 module hardware in more detail, and
explains how to set up and use the accompanying prototyping and develop-
ment board.
NOTE: This chapter (and this man-
ual) assume that you have the Rab-
bitCore RCM2200 Development Kit.
If you purchased an RCM2200
module by itself, you will have to
adapt the information in this chapter
and elsewhere to your test and
development setup.
2.1 Development Kit Contents
The RCM2200 Development Kit contains the fol-
lowing items:
• RabbitCore 2200 module with Ethernet port,
256k flash memory and 128k SRAM.
• RCM2200 Prototyping Board.
• Wall transformer power supply, 12 VDC, 500
mA. (Included only with Development Kits
sold for the North American market. Overseas
users will have to substitute a power supply
compatible with local mains power.)
• 10-pin header to DE9 programming cable
with integrated level-matching circuitry.
• Dynamic C SE CD-ROM, with complete
product documentation on disk.
• This Getting Started manual.
• Rabbit 2000 Processor Easy Reference poster.
• Registration card.