RabbitCore RCM2000 Series, Руководство по началу работы

Страница: 6 / 46

2 RabbitCore RCM2200
In addition, a variant of the RCM2200 is available. The RCM2300 omits the Ethernet con-
nectivity but offers a much smaller footprint, one-half the size of the RCM2200.
Another RabbitCore module can be used to reprogram an RCM2200. This reprogramming
(and debugging) can be done via the Internet using Z-World’s RabbitLink network pro-
gramming gateway or with Ethernet-equipped RabbitCore RCM2100 and RCM2200
models using Dynamic C’s DeviceMate features. The RCM2200 is particularly suitable
for use as an inexpensive hardware platform for Dynamic C’s DeviceMate features.
1.1.1 Physical & Electrical Specifications
Table 2 lists the basic specifications for the RCM2200.
NOTE: For complete product specifications, see Appendix A in the RabbitCore
RCM2200 User’s Manual.
The RCM2200 modules have two 26-pin headers to which cables can be connected, or
which can be plugged into matching sockets on a production device. The pinouts for these
connectors are shown in Figure 1 below.
Figure 1. RCM2200 Connector Pinout
Table 2. RCM2200 Specifications
Specification Data
Power Supply 4.75 – 5.25 V DC (134 mA at 22.1 MHz clock speed)
Size 2.3” x 1.6” x 0.86” (59 mm × 41 mm × 22 mm)
Environmental
0
°
C to 70
°
C, 5–95% humidity, noncondensing
Note: These pinouts are as seen on
the Bottom Side of the module.
VCC
PC1
PC3
TPOUT+
PD3
PD5
/IOWR
PE1
TPIN+
PE5
PE7
A2
A0
GND
PC0
PC2
TPOUT-
LNK
PD4
/IORD
PE0
TPIN-
PE4
ACT
A3
A1
J4
PA0
PA2
PA4
PA6
/RES
PB2
PB4
PB7
D6
D4
D2
D0
VCC
PA1
PA3
PA5
PA7
PB0
PB3
PB5
D7
D5
D3
D1
VBAT
GND
J5