![background image](http://html2.mh-extra.com/html/rabbit/rcm2000/rcm2000_getting-started-manual_3120784023.webp)
Getting Started
19
If you are using Dynamic C version 7.04 or earlier, modify the BIOS source code as fol-
lows. Skip these three steps if your version of Dynamic C is 7.05 or later.
1. Open the BIOS source code file named
RABBITBIOS.C
, which can be found in the
BIOS
directory.
2. Change the line
#define USE115KBAUD 1
// set to 0 to use 57600 baud
to read as follows.
#define USE115KBAUD 0
// set to 0 to use 57600 baud
3. Save the changes using
File > Save
.
Now press
<Ctrl-Y>
. You should receive the “BIOS successfully compiled …” message
indicating that the target is now ready to compile a program.
You should then continue with
the sample programs in the next chapter.
Содержание RCM2000
