Rabbit RabbitCore RCM4000 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 124

Rabbit RabbitCore RCM4000 Скачать руководство пользователя страница 67

User’s Manual

61

5.3 Upgrading Dynamic C

Dynamic C patches that focus on bug fixes are available from time to time. Check the Web
sites

•

www.zworld.com/support/

or

•

www.rabbitsemiconductor.com/support/

for the latest patches, workarounds, and bug fixes.

5.3.1 Add-On Modules

Dynamic C installations are designed for use with the board they are included with, and
are included at no charge as part of our low-cost kits. Z-World offers for purchase add-on
Dynamic C modules including the popular

µ

C/OS-II real-time operating system, as well

as PPP, Advanced Encryption Standard (AES), FAT file system, RabbitWeb, and other
select libraries.

NOTE:

Version 2.10 or later of the Dynamic C FAT file system module is required for

the RCM3365 and RCM3375 models.

Each Dynamic C add-on module has complete documentation and sample programs to
illustrate the functionality of the software calls in the module. Visit our Web site at

www.rabbit.com

for further information and complete documentation for each module.

In addition to the Web-based technical support included at no extra charge, a one-year
telephone-based technical support module is also available for purchase.

«
...
65
66
67
68
69
...
»

Содержание RabbitCore RCM4000





























































































































Отзывы:

Нет отзывов