Getting Started
35
•
ENET_MENU.C
—This program demonstrates how to implement a menu system using a
highlight bar on a graphic LCD display and to communicate it to another single-board
computer via Ethernet.
Use
ENET_AD.C
to program the other single-board computer with analog inputs and
outputs.
•
MBOXDEMO.C
—Implements a Web server that allows e-mail messages to be entered
and then shown on the LCD/keypad module.
•
SMTP.C
—This program allows you to send an E-mail when a switch on the Prototyp-
ing Board is pressed. Follow the instructions included with the sample program.
•
PINGLED.C
—This program demonstrates ICMP by pinging a remote host. It will flash
LEDs DS1 and DS2 on the Prototyping Board when a ping is sent and received.
4.12 Where Do I Go From Here?
NOTE:
If you purchased your RCM3000 through a distributor or through a Z-World or
Rabbit Semiconductor partner, contact the distributor or Z-World partner first for
technical support.
If there are any problems at this point:
•
Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
•
Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/bb/
.
•
Use the Technical Support e-mail form at
www.zworld.com/support/questionSubmit.shtml
.
If the sample programs ran fine, you are now ready to go on.
Additional sample programs are described in the
Dynamic C TCP/IP User’s Manual
.
Please refer to the
Dynamic C TCP/IP User’s Manual
to develop your own applications.
An Introduction to TCP/IP
provides background information on TCP/IP, and is available
on the CD and on Z-World’s Web site.
Содержание RabbitCore RCM3000
