Getting Started
15
2.5 Where Do I Go From Here?
We recommend that you proceed to the next chapter and install Dynamic C (if you do not
already have it installed), then run the
PONG.C
sample program to verify that the
RCM3000 module and the Prototyping Board are set up and functioning correctly.
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Section 3.3 to get a basic familiarity with
Dynamic C and the RCM3000 module’s capabilities.
2. For further development, refer to the
RabbitCore RCM3000 User’s Manual
for details
of the module’s hardware and software components.
A documentation icon should have been installed on your workstation’s desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
default.htm
in the
docs
folder in the Dynamic C installation folder.
3. For advanced development topics, refer to the
Dynamic C User’s Manual
and the
Dynamic C TCP/IP User’s Manual
, also in the online documentation set.
2.5.1 Technical Support
NOTE:
If you purchased your RCM3000 through a distributor or through a Z-World or
Rabbit Semiconductor partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
•
Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/bb/
.
•
Use the Technical Support e-mail form at
www.zworld.com/support/questionSubmit.shtml
.
Содержание RabbitCore RCM3000
