Rabbit RabbitCore RCM2200 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 91

background image

User’s Manual

35

5.5 Upgrading Dynamic C

Dynamic C patches that focus on bug fixes are available from time to time. Check the Web
site

www.rabbit.com/support/

for the latest patches, workarounds, and bug fixes.

The default installation of a patch or bug fix is to install the file in a directory (folder) dif-
ferent from that of the original Dynamic C installation. Rabbit recommends using a differ-
ent directory so that you can verify the operation of the patch without overwriting the
existing Dynamic C installation. If you have made any changes to the BIOS or to libraries,
or if you have programs in the old directory (folder), make these same changes to the
BIOS or libraries in the new directory containing the patch. Do

not

simply copy over an

entire file since you may overwrite a bug fix; of course, you may copy over any programs
you have written. Once you are sure the new patch works entirely to your satisfaction, you
may retire the existing installation, but keep it available to handle legacy applications.

5.5.1 Extras

Dynamic C installations are designed for use with the board they are included with, and
are included at no charge as part of our low-cost kits.

Starting with Dynamic C version 9.60, Dynamic C includes the popular µC/OS-II real-
time operating system, point-to-point protocol (PPP), FAT file system, RabbitWeb, and
other select libraries. Rabbit also offers for purchase the Rabbit Embedded Security Pack
featuring the Secure Sockets Layer (SSL) and a specific Advanced Encryption Standard
(AES) library.

In addition to the Web-based technical support included at no extra charge, a one-year
telephone-based technical support subscription is also available for purchase.

Visit our Web site at

for further information and complete documentation.

«
...
39
40
41
42
43
...
»

Содержание RabbitCore RCM2200




























































































Отзывы:

Нет отзывов

Похожие инструкции для RabbitCore RCM2200

Бренд: IBM Страницы: 86

Бренд: Lattice Semiconductor Страницы: 15

iCE40 UltraLite

Бренд: Lattice Semiconductor Страницы: 13

InterReach Fusion ADCP-77-044

Бренд: TE Connectivity Страницы: 236

Бренд: NXP Semiconductors Страницы: 24

Бренд: Paradyne Страницы: 85

HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Бренд: Belden Страницы: 84

Mercury FireWire 400

Бренд: OWC Страницы: 2

RanaSystems 13-0010--001

Бренд: RANA Systems Страницы: 328

Бренд: SYNTEK Страницы: 41

Бренд: Rainbow Страницы: 2

Бренд: Intercoax Страницы: 2

Бренд: ANEP Страницы: 48

Бренд: Dahua Страницы: 113

Бренд: ETAS Страницы: 84

Mustang-M2AE-MX1

Бренд: IEI Technology Страницы: 58

XC-16CH-NVR-4TB

Бренд: Xyclop Страницы: 19

Бренд: Patton electronics Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды