Rabbit Air MinusA3, Руководство пользователя

Страница: 10 / 16

18 Rabbit Air - 19
Wall-Mounting
Your MinusA3
The MinusA3 Air Purifier is designed to be
either freestanding or wall-mounted. Only
use the approved Rabbit Air wall-mount kit
to install the MinusA3 Air Purifier on your
wall.
Refer to the wall-mounting guide sheet for
step-by-step instructions.
General Guidelines:
• The MinusA3 Air Purifier can be mounted
right side up or upside down. We
recommend mounting it upside down if
mounting higher than 6 ft. to ensure you
can access the Control Panel easily.
• We recommend leaving at least two feet of
clearance from air outlet and eight inches
of clearance on either side to ensure
optimal performance.
• Be careful not to drop the Front Panel or
Filter Case when replacing the filters.
• Do not pull on the power cord.
• Make sure the hanger screws have been
securely driven into studs.
Questions? Reach us at www.rabbitair.com or
888.866.8862.
Disclaimer for Installing
Wall-Mounted Objects
Do not attempt to install this product if you do not understand the instructions. Contact a qualified contractor to install
the mounting bracket and call 1.888.866.8862 if you have any questions. You risk the possibility of damaging the air
purifier, damaging other property, and personal injury if the mounting bracket is not installed properly. Check to make
sure there are no missing or defective parts. Do not attempt to install the mounting bracket if there are missing or
defective parts. Contact Rabbit Air and replacement parts will be shipped to you immediately. Rabbit Air is not liable for
damage or injury caused by incorrect mounting, incorrect assembly or incorrect usage.
• After installing the wall-mount bracket, make sure it is firmly in place before putting the MinusA3 Air Purifier on it.
• Take care not to drill or screw into existing wiring in the wall while installing the wall-mount bracket.
Correct installation is extremely essential and falls outside the scope of responsibility of Rabbit Air. Please consult a
qualified contractor and/or specialist supplier to install the mounting bracket. Maximum weight of air purifier SPA-1000N:
11.5 kg/ 25.4 lbs.