RAB X17 XFU Скачать руководство пользователя страница 3

INSTRUCTIONS

 

X17™

 XFU 3-WAY FIELD-ADJUSTABLE

 

FLOODLIGHT INSTALLATION 

RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install 

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]

X17 XFU 60/50/30W Knuckle

KNUCKLE MOUNT

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  

RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is 
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON 
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 

WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside. 
WARNING: Do not use an electric generator to test LED fixtures.
WARNING: Min 75°C SUPPLY CONDUCTORS. 

1.  Secure the fixture to a 1/2” NPS hole in the junction box or 

landscape post as shown in 

Fig. 1. 

Seal arm thread using     

Teflon® tape or silicone sealant.

2.  Make appropriate wire connections per NEC in an approved 

enclosure 

(not included)

 see 

Fig. 7.

3.  The 

Knuckle Arm

 allows 180° of vertical aiming adjustment 

depending on the mounting position as shown in 

Fig. 2.

Fig: 1

Fig: 2

Knuckle Arm

Pole

TRUNNION MOUNT

To adjust the angle of the 

Fixture

 using the 

Trunnion

 

(Fig. 4):

1.  Loosen the 

Pivot Bolts 

and 

Angle Locking Screws

.

2.  Make appropriate wire connections per NEC in an approved 

 

enclosure 

(not included)

 see 

Fig. 7.

3.  Adjust fixture to desired angle.
4.  Tighten

 Pivot Bolts

 and 

Angle Locking Screw.

SLIPFITTER MOUNT

1.  Place the 

Slipfitter

 over the 

Tenon 

and secure the

 Fixture

 with 

the

 

Locking Bolts 

(

4

)

 

on the side of the 

Slipfitter

 as shown in  

Fig. 3.

2.  Make appropriate wire connections per NEC in an approved 

enclosure (

not included)

 see 

Fig. 7.

3.  Loosen the 

Locking Bolts (

4

and swivel 

Fixture 

to desired angle.

4.  Tighten the

 Locking Bolts

 (

4

).

Fig: 3

Fig: 4

Pivot Bolt

Angle Locking Screw 

X17 XFU 60/50/30W Trunnion

X17 XFU 60/50/30W Slipfitter

Fixture

Slipfitter Mount

Locking Bolt (

4

)

Wire

Tennon

To ensure weatherproof seal, apply weatherproof silicone sealant 
around the edge of the junction box 

(not supplied)

. This is especially 

important with an uneven wall surface. 

Содержание X17 XFU







Отзывы: