INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
CANOPY KIT-TO-FIXTURE INSTALLATION
Cable
Junction Box
(sold separately)
Cross Bar
Locknut
Canopy
with Power
Cord
1/4- 20 Stud
Strain Relief
Canopy
Rings
Power Cord
Fixture
Cable Coupler
Cable Coupler Nut
Strain Relief
Cable Coupler
Fig: 5
CANOPY-TO-SURFACE MOUNTING
1. Slide
Power Cord
through the hole on
Canopy
and tighten
with
Strain Relief
. Slide
Power Cord
through the hole on
Canopy
and tighten with
Strain Relief
. Orient the Fixture so
that the
Canopy
with
Power Cord
is aligned with supply wire
access as shown in Fig. 5.
2. Connect wires as shown in wiring diagram. Push all wires back
into the Junction Box. Be careful not to pinch wires. Mount the
Cross Bar
on Junction Box.
3. Place the
Canopy
on the mounting surface. Push
Cable
Coupler
on the
1/4-20 Stud
and tighten the Fixture.
4.
Canopy
and
Cable
without
Power Cord
can be mounted
with a
1/4 -20 Stud
and hardware appropriate to mounting
surface.
5. Push L
ens and Tray Assembly
into the
Housing Cover
.
Align
Keys
into
Key Slots
and slide to the left to lock the
Housing Cover
into the
Lens and Tray Assembly
. Snap on
End Caps
.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.
Fig: 4
Knockouts
1.
Remove
End Caps
. Slide
Lens Tray Assembly
from
Housing
Cover
to release
Tray Assembly
from
Housing Cover
by
sliding the fi xture to the right to unlock from
Key Slots
as
shown in Fig. 3. Pre-installed
Tether Cables
(2)
will prevent
Lens and Tray Assembly
from separating from
Housing
Cover
as shown in Fig. 1.
2. For
Canopy Mounting
, remove
Knockouts
on the
Housing
Cover
as shown in Fig. 4. Insert
Cable Coupler
from the inside
of the
Housing Cover
into the two respective
Knockouts
.
3. Secure the
Cable Coupler
with
Cable Coupler Nut
onto the
Housing Cover
as shown in Fig. 5.
4. Insert the
Cable
into the
Cable Coupler
. Adjust the length of
the
Cable
and tighten the
Locknut
and trim any excess cable.
5. Attach
the
Canopy
with
Power Cord
to the
Housing Cover
such that it is aligned with supply wires access. Push
Cord
Retainer
into the fi xture
Housing Cover
.
6. Loosen the
Locknut
on
Cable Coupler
.
7. Rotate the
Locknut
and tighten.
8. Pass the
Power Cord
through the
Canopy Rings
. Adjust the
length of the
Power Cord
and tighten it on the
Canopy
with
Strain Reliefs
.
9. Mount all
Canopies
to the Fixture with appropriate
Cable
length.
