INSTRUCTIONS
SMSLES2X13 INSTALLATION
INSTRUCTIONS
SMSLES2X13 INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Page 3
Page 4
Photoelectric Control:
Deactivates lights
during daylight. Fully adjustable for 24
hour operation or custom applications.
Vandal Resistant Lens:
Hard lens resists
casual vandalism.
Case Construction:
Precision molded
Lexan®
Color Matched Lens:
Dark lens with black
units. White lens with white units.
Surge Protection:
Withstands up to
3000 Volts
Manual Override:
Double flip wall switch
logic prevents activation by short power
outages. Resets to auto at dawn.
No extra wiring needed.
LED Detection Indicator:
Glows red day
and night for “on-guard” deterrence.
RF Immunity:
Circuits fully shielded for
maximum radio frequency immunity.
Model:
500 Watts Incandescent
100 Watts Fluorescent at 120 Volts
500W LED SMSLES13 at 120 Volts
5 Amps, 450 Watts LED at 120 Volts with
..
0.8pF driver
5 Amps, 300 Watts LED at 120 Volts with
..
0.5pF driver
Voltage:
120 Volts AC
Power Consumption:
1W
UL Listing:
Raintight Photoelectric Switch
Suitable for wet locations.
Time Adjustment:
5 seconds to 15
minutes
Quick Test Time:
5 second test time for fast
installation. Works day or night.
Detection Zone:
Full 180º by 30’
“No Hands” Auto Testing:
Auto mode
starts after 3 minutes of testing.
No adjustment needed.
Built for Severe Conditions:
Double
weatherproofing for long life.
Wire
Nuts (3)
Adjustment
Tool
Lens
Mask
SMSLES2X13
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
firmly. Apply weatherproof silicone sealant around the edge of the ceiling mounting box and/or junction box. This is
especially important with an uneven ceiling surface. Silicone all plugs and unused conduit entries.
CONTENTS
SENSOR SPECIFICATIONS
WHY RAB SENSORS?
Smaller is better!
Mini Sensor uses state-of-the-art surface
mount technology (SMT), just like cellular
phones and beepers. SMT gives you more
reliability, greater RF immunity, and a
compact sensor that can fit neatly where
others cannot.
Wider is better!
The wide 180° view detects movement
along the entire side of a building with
only one compact sensor. It will detect
people as they exit or enter. It takes several
conventional sensors to get the same
coverage.
Molded is better!
No leaky gaskets or bug hotels with Mini
Sensor. The hard lens is molded as part
of the case. It’s vandalproof, rainproof,
bugproof and absolutely sealed.
